Tutorials • Webuzo

SSH settings in Webuzo

In this tutorial, learn how to block SSH access on the Webuzo server by enabling the connection and configuring the necessary port.

20
Views 528Updated 2 luniPublished on 12/06/2018by Alexandru Rogojan

Introduction

  • In this tutorial, we will guide you through the necessary steps to block access to the server from one or more IP addresses.

Requirements

Steps

  • The steps necessary to enable SSH access are as follows:

1. Access the Webuzo panel

Access the Webuzo panel and navigate to the SSH section.

Secțiunea SSH Webuzo

2. Activate SSH access

After accessing the "SSH" section, the following window will open:

  • Check the Enable SSH/SFTP option to enable SSH access.
  • Currently, SFTP support is not offered.

Activare acces SSH

3. Configure the SSH port

Enter the desired port for the SSH connection in the dedicated field. We recommend using the default port 15222.

4. Apply the settings

After configuration, press the Enable SSH/SFTP button. The settings will be applied, and the SSH connection will become active.

Important note:

  • In the case of VPSs managed by Hostico, you must follow the detailed instructions here: SSH Access.
  • In the case of client-managed VPSs, the settings presented in this tutorial will be applied by the server, and the connection will be made based on the user and password held by the client.